WHLE-LS1 Single Board Computer

$579$779 (+ VAT)

NXP Layerscape® LS1 series SoC based on Arm® Cortex®-A53 or Cortex®-A72 SmartNIC features and over 45,000 CoreMark® performance

  • NXP Layerscape® processor
  • Up to 1.8 GHz
  • Up to 8 cores
  • Packet processing engine
  • 4x 1 Gigabit Ethernet
  • 3x PCIe M.2
  • Up to 64 GB eMMC
  • 2x USB 3.0
SKU: N/A Category:

Description

WHLE-LS1 – High-Performance Single Board Computer

The Conclusive Engineering Whale WHLE-LS1088A-E64 is a high-performance Single Board Computer. It is powered by the NXP QorIQ® Layerscape® LS1088A SoC, based on ARM® Cortex®-A53, optimized for maximum power efficiency, at the cost of lower single-core performance. It is capable of delivering an approximate performance of 33,536 CoreMark.Whale offers features typically associated with SmartNICs thanks to Layerscape’s integrated Data Path Acceleration Architecture, fully leveraged in board design. It offers fine-grained control over its 6 Ethernet connectors (4xRJ45, 2xSFP+) and advanced traffic routing and processing capabilities.

Whale is capable of native, hardware-supported real-time operation.

For advanced customization options, please contact us directly.

Specification

SoC NXP Layerscape® SoC variants:

  • LS1026, 2 core Arm® Cortex®-A72 1.8 GHz CPU with DPAA
  • LS1046, 4 core Arm® Cortex®-A72 1.8 GHz CPU with DPAA
  • LS1048, 4 core Arm® Cortex®-A53 1.4 GHz CPU with DPAA2
  • LS1088, 8 core Arm® Cortex®-A53 1.6 GHz CPU with DPAA2
Memory1x SO-DIMM socket supporting up to 32 GB DDR4 SDRAM with ECC (up to 2100 MT/s)
Ethernet
  • 4x 1 Gbit/s RJ45
  • 2x 10 Gbit/s SFP+
Mass storage
  • 4-64 GB eMMC
  • 16 MB QSPI NOR Flash
  • 8 KB EEPROM
PCIe
  • M.2 Key-M 2280 PCIe 3.0 x2 NVMe
  • M.2 Key-M 2280 PCIe 3.0 x1 NVMe
  • M.2 Key-E 2230 PCIe 3.0 x1 WiFi/BT with USB 2.0, I2C, UART
USB
  • 1x or 2x USB A 3.0
Debug
  • Conclusive Developer Cable connector providing access to:
  • – System UART
  • – JTAG port
  • – System I2C bus
  • 1x USB Micro-B 2.0 console port (System UART)
Software support
  • Linux 6.1 & 6.5
  • U-Boot
  • UEFI-EDK2
  • Yocto
  • Buildroot
  • Ubuntu
  • FreeBSD (on request)
Additional features
  • RTC with CR2032 back-up battery
  • Boot source selector DIP switch
  • 2x bi-color status LED
  • Two channel fan controller with 3 pin and 4 pin fan connectors
  • 6x GPIO (3.3V)
  • External I2C (3.3 V)
Power supply12 V DC, 2.5 x 5.5 mm barrel connector
Dimensions130 x 130 mm

Enquiry for a product - WHLE-LS1

If you need larger quantities or custom solutions, please contact us directly

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping